Flat Screen Washer :: Flat Screen Dryer

This Machine enables washing and drying of Flat Bed Screens with the minimal of water consumption compared to manual washing and labour is saved as the process of washing and drying is automatic.    The Flat Bed Screen is moved vertically to the Washing and Drying chamber on a Nylon Conveyor with a speed of one Meter per Minute.  This reduces the expectancy time of getting ready the Screens.  Damages and distortion of bolting cloth that used to happen in manual cleaning is avoided by using this Machine.

The Machine is constructed with Heavy-duty structural steel and the top is of S.S. material. The Nylon conveyor belt and the roller supports for screen frame mounting move with the help of A.C. Electric Motor and Reduction Gear Unit.  Appropriate conveyor tensioning and guiding system is also provided. 

The Washing and Drying Chamber that is made out of SS Material consists of three zones viz. pre-washing, rinsing and drying.

• Pre-washing Zone has series of moving and staggered nozzles and flat Brushes, which involve in cleaning of Screen from all corners using circulated water that is sprayed using a High Pressure Pump.
  
• Rinsing Zone finishes washing of Screen using fresh water with a pair of spray pipes attached with water feed Pump.
  
• Residual water particles remaining on the Screen is scattered by high-pressure ambient air blade formed from Air Blowers

Working of the Machine is such that the Screen placed on supporting rollers of the revolving Nylon conveyor is moved into Washing Cabinet duly guided between supporting frame structure.

Water sprayed in high pressure duly re-circulated for reducing water consumption, is used in the pre-washing zone to clean screen. Three pairs of moving spray nozzles and flat brushes are kept in alternative positions so that both the sides of the screen are cleaned well. An up-down movement, which is given unique in nature to brushes and nozzles, enables to clean screen from all corners. Thus pre-washing is enabled without consuming any fresh water. In rinsing zone fresh water feed Pump sprays water in pressure through two spraying pipes for final washing of Screen.

The Screen then enters the drying zone where a heavy-duty blower that forms high-pressure ambient air blades disperse water drops from its surface. Thus Screen gets partially dried-up. The exit of screen automatically stops conveyor to avoid falling of screen from the Machine.